Outfitted using the zero leak bidirectional checking sole-noid valves, this power unit is intended for that operation of two independent circuits. Which are respectively for the key and subordinate platforms of your double scissors lift. Two cut-off valves are used for lowering the machine manually in situation of electrical power loss. If a lot more independent circuits are required for your application please make contact with us for availability.
Remark: one. Please seek the advice of our income engineer for your unique pump displacement, motor power or tank capability.
two. CSA or UL licensed motors are available on request.
1. The AC motor is of S3 duty cycle, which can only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean each of the hydraulic parts concerned before installation of the power unit.
3. Viscosity of your oil shoud be 15~46 cst,plus the oil must be clean and free of charge of impurities,N46 hydraulic oil is recommended.
4. The energy unit really should be mounted vertically.
5. Check the oil level during the tank just after the original running with the electrical power unit.
6. Oil altering is needed just after the initial a hundred operation hours,afterwards the moment each 3000 hrs.