Consisting of a strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate materials managing gear. The reducing movement is achived by the solenoid valve with all the decreasing speed managed by an adjustable needle valve. The left and ideal functions are outfitted with a dual pilot operated verify valve and cross-over relief valves.
Remark: Please talk to our revenue engineer to the distinct pump displacement, motor electrical power or tank capacity.
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned ahead of set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which must also be clean and no cost of impurities.N46 hydraulic oil is recommended.
four. This electrical power unit should be mounted horizontal.
5. Check the oil level from the tank soon after the primary start off with the energy unit.
six. Oil shifting is needed right after the preliminary a hundred operation hrs, afterwards after each and every 3000 hrs.