Material Dealing with Energy UNIT 2
This power unit options energy up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve using the reducing velocity controlled from the pressure compensated movement manage valve. Solutions of this series is usually extensively used in the market of logistic devices like fork lift, mini lift table, and so forth.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all the hydraulic components concerned in advance of mounting the electrical power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities, N46 hydraulic oil is proposed .
four. Oil transforming is required following the original a hundred operation hours,afterwards the moment just about every 3000 hours.
five. The energy unit really should be mounted horizontally.
Materials Managing Electrical power UNIT 1
This energy unit is designed for your fork lift business, consisting of hugely productive gear pump, DC motor, guide increase and lower valve, tank, ect. The up and down movement are controlled through the lever on the guide release valve, which is outfitted with an electrical switch to activate the motor. The lowing velocity is managed from the strain compensated flow manage valve.
one. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean every one of the hydraulic components concerned just before installation of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
four. Oil transforming is required after the preliminary one hundred operation hrs, afterwards once every 3000 hours.
five. The energy unit shown is designed to be mounted horizontally.